Airtrade ABOUT | ADVANCED SEARCH | ORDER STATUS | VIEW CART
products - Airware International Limited
Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout

Login Status  Login Status

Not logged in

» Login

Home » Products By Suppliers » All Products

 Checkout
BEA Technologies XAK1
Joining Kits for in line mounting of CDF30, CDF60 & CDF100 BEA In Line Compressed Air Filters
Price: £20.35
Bambi HT15-2P
0.75HP motor running at 220-240V, with a 15 litre receiver, and makes only 59 dB(a) of noise. It has a flow of 130 L/Min at 1 Bar to a flow of 65 L/Min at 8 Bar.

12 month warranty..
14 kg packed weight.
Price: £425.00


Jorc 2506 FLUIDRAIN-COMBO Timed Auto Drain with strainer
Jorc 2506 FLUIDRAIN-COMBO Timed Auto Drain with strainer
J 2503 AWI SD1 FLUIDRAIN-COMBO is a timed auto drain - 16 bar maximum operating pressure. A 230 volt supply required. It has an INTEGATED BALL VALVE and STRAINER fitted to help prevent clogging.

1/2" ports are standard with bushes fitted for 1/4" and 3/8"

115v, 24v and 12v models available on special order - please e-mail your requirements to us via the "Contact" link on the top toolbar.

The time interval between discharges and the time of discharge is adjustable.

**INDUSTRY STANDARD WITH BALL VALVE AND STRAINER FITTED AS STANDARD**

Price: £54.75
 
JORC 95139 Service Kit (two bag kit) for JORC PURO MINI UNIT 9513
Replacement White bag kit for JORC PURO J9513 MINI (60 cfm) Oil Water Separator.

Price: £75.00


JORC 9261 SEPREMIUM 10 350 cfm capacity Compressed Air Condensate Oil - Water Separator
The JORC J9610 SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM 10 is designed to operate with all compressors using mineral or semi synthethic lubricants which have a capacity up to 350 cfm, or 10 m/min per min.
Price: £565.00
La-Man MD-80LS Membrane Dryer
The La-Man MD-80LS Membrane Dryer comes complete with float drain, and 0.01 micron Filter Pre-Filtration System. Ideal for point of use very dry air - down to minus 40 degrees C Pressure Dew Point!

80 cfm flow at up to 150 psi (2.27 m3 / min @ 10 bar) 1" connections.

MD Series LaMan Membrane Dryers are ideal for local point of use very dry very clean compressed air - and are used in paint spraying, food processing, laboratory and any number of applications demanding clean dry compressed air.

See 150SKA for prefilter service kit and SAM550E for the fine filter service kit.

Product weight 30 kg. Allow 5 - 7 days for delivery.
Price: £3,772.00


Mattei BLADE 11L Air Compressor with dryer receiver options
BLADE 11 L

11 kW 15 hp electric 3 phase motor

8 bar 115 psig Maximum Pressure

1.7 m3/min 60 cfm FAD

67 dB(A)

950mm (L) x 730 mm (W) x 800mm (H)

The BLADE compressor range, with operating pressures from 8 to 13 bar, is the ideal solution for the needs of small and medium sized companies as well as artisan businesses. The rotary vane technology ensures high quality compressed air, an extremely compact airend and low noise levels. All combined with undisputed product reliability for any application.
Mattei 8 Bar 115 psi
10 Bar 145 psi
13 Bar 189 psi (+ £180.00)
Mattei Base Unit - No Receiver
270 litre Receiver Mounted unit (+ £280.00)
270 litre Receiver with dryer (+ £1,010.00)
Price: £3,510.00
BAMBI VT75D
VTS Range - Oil Free Dry Air Dental Super Silent 54 db(A) Air Compressor, with 0.75Hp 120 l/min, 4.2 cfm, output on a 23 litre receiver.

12 month warranty..
64 kg packed weight.
Price: £1,295.00


BAMBI VTS75D
VTS Range - Oil Free Dry Air Dental Super Silent 54 db(A) Air Compressors with 0.75Hp 120 l/min, 4.2 cfm output, on a 23 litre receiver.

12 month warranty..
64 kg packed weight.
Price: £2,450.00
BAMBI Air Compressor 75/250
'MD' Medical/Dental Range - oil lubricated, low 55 db(A) 0.5Hp 78 l/min on a 24 litre receiver.

12 month warranty.
35 kg packed weight.
Price: £825.00


 
AMD 18 Refrigerant Dryer 64 cfm
The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection.

AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

AMD 18 Flow rate 1800 l/min 64cfm @ 5 Deg C Pressure Dew Point
Connections 1/2"BSP-F
370mm W x 515mm D x 475mm H
Max Inlet Pressure 16 Bar
230v single phase electrical supply required.
34 kg



AMD 18 Data Sheet



Price: £675.00
BEA Technologies ARS180RA
Fine 0.01 micron element for oil removal.
Replacement Element for filter CDF 180

12 month warranty.
1 kg packed weight.
Price: £70.00


BAMBI BB24V
BAMBI BB24V Super Silent 40 d(B)A Compressor on compact 24 litre tank
Oil lubricated 0.5Hp, 8 bar with pressure regulator max 40 litre/min, 1.4 cfm flow FAD, 230v-1-50Hz

Duty cycle of BAMBI BB24V is 50% with intermittent use.

12 month warranty..
28 kg packed weight.
Price: £295.00
BEA Technologies XAK2
Joining Kits for in line mounting of CDF180 & CDF290 BEA In Line Compressed Air Filters
Price: £24.05


Bambi HT24
0.75HP motor running at 220-240V, with a 24 litre receiver, and makes only 53 dB(a) of noise. It has a flow of 79 L/Min at 1 Bar to a flow of 27 L/Min at 8 Bar.

12 month warranty..
15 kg packed weight.
Price: £475.00
 
JORC 9602WB SEPREMIUM 2 SERVICE PACK (no bracket)
Complete service pack for JORC SEPRIMIUM 2 Compressed Air Oil - Water Condensate System but less the reusable brackets supplied with the original kit.
Price: £75.00


JORC 9620 SEPREMIUM 20 750 cfm capacity Compressed Air Condensate Oil - Water Separator
The JORC J9620 SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM 20 is designed to operate with all compressors using mineral or semi synthethic lubricants which have a capacity up to 700 cfm, or 20 m/min per min.
Price: £750.00
La-Man SPG102 Element
Element for the SPG 100

Product weight 1 kg.
Price: £7.50


BAMBI Air Compressor 75/250V
'MD' Medical/Dental Range - oil lubricated, low 55db(A) noise, 0.5Hp 78 l/min on a 24 litre 'button' receiver.

12 month warranty..
35 kg packed weight.
Price: £825.00
 
AMD 25 Refrigerant Dryer 88 cfm
The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection.

AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

AMD 25 Flow rate 2500 l/min 88cfm @ 5 Deg C Pressure Dew Point
Connections 1"BSP-F
345mm W x 420mm D x 740mm H
Max Inlet Pressure 14 Bar
230v single phase electrical supply required.
38 kg



AMD 25 Data Sheet



Price: £825.00

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »

Tell us what you need and we will try and help! (Click Here) Or call us on (44) 01527 870110